This beautiful and versatile needlework stand works for a variety of projects-- whether your passion is cross-stitch, needlepoint, crewel, embroidery, or small piece quilting. The furniture quality oak frame frame looks attractive while your stitching project is in progress. The pillar legs provide a stable platform for all your projects. Spacers allow the entire scroll frame to rotate a full 360° for quick, easy access to the back of your project. The adjustable side extender bars allows placement of your frame to best suit your seating position and the position of your project for either lap or table use.

Assembly is simple and can be completed within minutes without any tools required. Assembly instructions can be found here. Instructions on how to attach the fabric to the frame are here. This sturdy frame is fashioned from solid American Red Oak and hand finished with natural oil stain.

The Tomorrow's Treasures Lap and Tabletop Stand Webbing Version includes:

• 2 Legs which are 15.5" tall, 2.5" wide at the top and 4.5" wide at the base.

• 2 Feet

• 2 12" Adjustable Side Bars

• 2 qty 20" Heavy duty scroll rods, with webbing fabric attached

• Two spacers

• 10 Knobs

• 2 qty 3" Pan-head Screws

• 2 Flat Washers

This lap stand uses the Webbing system to attach the fabric to the scroll rods. Rods come with webbing fabric already attached to them. Stitch your project fabric to the webbing rods, then assemble and tighten your scroll frame to achieve optimal tension.

Click here for my Blog on How to attach your project fabric to the E-Z Stitch Webbing Scroll Rods.

One of the benefits of using our Lap Stand is that now you can stitch with both hands. I have found that not only is stitching with both hands much faster, but my stitches look much neater and straight. Another benefit is that your hands scarcely touch the fabric now, so fabric will be clean when you are finished with a project.

Click here for my Blog Two handed stitch with the E-Z Stitch Scroll Frames.

The Lap / Tabletop Stand is versatile and can be adapted to many configurations:

• the height of the stand is adjustable by inserting the screw through any of the holes drilled in the leg.

• You can adjust the size of the stitching area by moving the rods closer or further apart on the Side Bar. The 12” Side Bars are adjustable to 6”, 8”, 10”, and 12.”

• Any size of the E-Z Stitch Scroll Rods can be used with our Lap Stand. Scroll Rods are available in sizes that range from 6” to 48.”

The E-Z Stitch Lap Stand is adjustable. The scroll frame can be attached to the Legs in a variety of positions. If you are stitching on a couch, you may want to position the scroll frame in the top holes, making it closer to yourself. If you are working on a tabletop, you can position it in the lower holes to bring it toward you. Combining different sizes of scroll rods and side bars creates a variety of sizes.

Need Scroll Rod Covers or Envelopes? check out all of our quilted accessories that we have created to go along with the E-Z Needlework System.

Flipping the Scroll Frame over to the back

There is a pan-head screw that goes through the Side Bar the Spacer then the Leg. Then a knob is attached and tightened to secure it in to place. That knob must be loosened before you flip it over to get to the back of your work. Then once you flip it back use a screwdriver to tighten it back down and secure the frame into place. 

Click here for my Blog Flipping the Scroll Frame over to get to the back of your work.  

 Make sure you always loosen the knobs before flipping it over other wise you could strip out the insert in the knob or strip the bolt. This kit eliminates the need of a screwdriver to tighten your scroll frame when flipping your scroll frame from the back.

Click here for our E-Z Stitch Video Blog